Random good picture Not show

61. The application and prospects of 3 - D numerical analysis in metal rolling were introduced.

62. By means of numerical analysis , the parameters the performance of the heat engine cycle are optimized.

63. In the general formula of numerical analysis method for dam stability, the reliability of safety evaluate for dam depends on the determination of natural earthquake influence coefficient.

64. Both the numerical analysis and experimental data show that the fatigue crack propagation rate is insensitive to the stress ratio for plain stress thin specimens.

65. The relationship between the optimal threshold price and limited inventory and the selling time were obtained by numerical analysis of them...

66. Numerical analysis shows that the effective masses cannot be ignored in comparison with parameters of rectangular barrier for the transmission coefficient.

67. Aim give a numerical analysis of secondary bifurcations of thermal convectional flow in porous media.

68. The function and application of 3DSIS are shown. The integrated model of 3DSIS, numerical analysis method and expert system is suggested.

69. Numerical analysis was used to simulate the process of sapphire crystal growth by modulating temperature.

70. The numerical analysis of this ECRM shows that this configuration nay operate at millimeterand submillimeter wavebands effectively and provide very high output power with high mode purity.

71. Calculation and numerical analysis from programming educesaccurate measurement of creepage distance in complicated structure, thereby strengthening the proficiency test ability.

72. The materials parameters were obtained through combination of experiments and numerical analysis, including optimization techniques.

73. Since it is hard to perform a full-scale model test, numerical analysis becomes an important basis and also one of the most difficult and pivotal problems in design.

74. Some conclusions the numerical analysis are helpful to the design of the GRPS embankment.

75. Based on Suifen River Cable-Stayed Bridge, the clear numerical analysis and reliable full-scale model test for the anchorage zone segment on the tower were carried out.

76. Finally time domain response is studied by numerical analysis way.

77. On the basis of the numerical analysis, forming laws of the metal in the flange area were induced and derived, and the forming velocity equations of metal in the flange area were obtained.

77. Sentencedict.com is a sentence dictionary, on which you can find excellent sentences for a large number of words.

78. Behavior of an improved pseudo viscous frictional damper ( IPVFD ) was studied by testing and numerical analysis.

79. A numerical analysis method is presented to simulate the shrinkage porosity formation in steel castings on the basis of heat flow, interdendritic fluid flow and possible evolution of dissolved gases.

80. FORTRAN: Procedural computer programming language developed for numerical analysis by John W. Backus and others at IBM in 1957.

81. Based on the partial elastohydrodynamic theory, a numerical analysis method is developed that can solve the contact of wheel and rail with water medium at higher speed.

82. Enjoy it ! - Just learning numerical analysis, we encountered interpolation.

83. The numerical analysis indicates that the deck longitudinal oscillation can create the maximum sinkage of the vehicle, so the longitudinal surge is the most dangerous factor of the deck motion.

84. Here source program has nearly covered the numerical analysis aspects, is the very good study material.

85. Heat transfer numerical analysis methods, maths model, and boundary condition treatment for an impingement-effusion cooled flame tube floating tile are discussed in the paper.

86. The numerical analysis results of the pressure distribution inside the pyrophyllite block were presented and the effect of the roasting temperature on the pressure-transmitting beh.

87. By using numerical analysis, the optimal design parameters of MTMD system are obtained.

88. Numerical analysis can reproduce the phenomenon of "Support foot distorted" and "Drum-shaped deformation" of.

89. Now numerical analysis method has been one of the most important- tools in solving problems in scientific research field.

90. Referring to the initial stress method in nonlinear elastisity problem, the authors propose an initial flow method for numerical analysis of see...